TRB exam online practice test for Civil Engineering dept provides you with ample practice material for TRB exam preparation for cse department which adheres to the real exam format. Each TRB - CIVIL exam practice test has 10 questions. After completing click on to the COMPLETE TEST to know the score and the correct answers.
1. |
Minimum number of hinges (natural and plastic) that are necessary to convert a portal frame fixed at base, to a mechanism is:.
|
2. |
Maximum permissible slenderness ratio of steel ties likely to be subjected to possible reversal of stress due to wind or seismic forces is :.
|
3. |
The Lacing should be designed to resist a transverse shear of magnitude ________________ percent of the axial force in the compression member..
|
4. |
A steel tape of 30 m long has a cross section of 6 mm x 1 mm. If the tape is tape is stretched by a force of 40 N and E = 200 GN /m2, the elongation is :.
|
5. |
The foundation in which a cantilever beam is provided to join two footings, is known as:.
|
6. |
A RCC beam of size 100 mm x 200 mm, the minimum reinforcement area provided for Fe 415 as per IS 456 – 2000 is :.
|
7. |
105.IS 1343 – 1980 for strands is :.
|
8. |
A town requires 30,000 m3 of water per day. It is to be treated with a chlorine dosage of 0.4 ppm. For this purpose the requirement of 30% bleaching power per day is:.
|
9. |
What proportion of right – turning traffic a rotary type of intersection is most suitable?.
|
10. |
What is the preferable ground slope on which a rotary should preferably be located?.
|